hoolahoous
10-11 11:50 AM
hi ,
Now middle vendor is threatning me that he can sue me for breaking the line of contract .
i dont understand ho can even its possible as i never signed any document with middle vendor and he is not even my employer . He is just acting as middle layer by showing prime vendor that i am his employee which is wrong.
anyone can sue anyone for whatever reason. However that doesn't mean they will win. Also your case seems slam dunk for you in case they decide to peruse legal options. You did NOT sign any contract with them so there is NO breach of contract. Also you can tell them that you are going to report to Prime vendor that they knowingly misrepresented you (said they employed you whereas they did not). That will make sure that Prime vendor terminates all relations with middle vendor or does not give further business to them. Max middle vendor can do is sue your employer (most probably they signed a contract which your company is breaking) but that is not your problem. Don't be afraid.
Disclaimer: I am not a lawyer. Do not take this as legal advice.
Now middle vendor is threatning me that he can sue me for breaking the line of contract .
i dont understand ho can even its possible as i never signed any document with middle vendor and he is not even my employer . He is just acting as middle layer by showing prime vendor that i am his employee which is wrong.
anyone can sue anyone for whatever reason. However that doesn't mean they will win. Also your case seems slam dunk for you in case they decide to peruse legal options. You did NOT sign any contract with them so there is NO breach of contract. Also you can tell them that you are going to report to Prime vendor that they knowingly misrepresented you (said they employed you whereas they did not). That will make sure that Prime vendor terminates all relations with middle vendor or does not give further business to them. Max middle vendor can do is sue your employer (most probably they signed a contract which your company is breaking) but that is not your problem. Don't be afraid.
Disclaimer: I am not a lawyer. Do not take this as legal advice.
wallpaper 1990 $50 Federal Reserve Note
mn1975
07-16 12:40 PM
I think the best way is to bring her back, because its Preferable to go to the same doctor
were you had done intial exams
Moreover to the best of my knowledge this cannot be done in india
I had to call my wife back for the same reason in May
hope this helps
were you had done intial exams
Moreover to the best of my knowledge this cannot be done in india
I had to call my wife back for the same reason in May
hope this helps
sanjay02
08-04 02:38 PM
Guys
I have filed for my renewal EAD on May 29th at NSC. My current EAD expires on Sept 24th. I havent got the renewal EAD yet, where as my wife got it both applications were sent in the same envelope. I am working on EAD and am losing sleep since if my EAD doesnt come in time I will be out of my payroll.
Has some one gone to the local USCIS office to get the interim EAD recently? I was told that option no longer exists.
Can some one post the FAX #s to expedite EAD requests?
I have filed for my renewal EAD on May 29th at NSC. My current EAD expires on Sept 24th. I havent got the renewal EAD yet, where as my wife got it both applications were sent in the same envelope. I am working on EAD and am losing sleep since if my EAD doesnt come in time I will be out of my payroll.
Has some one gone to the local USCIS office to get the interim EAD recently? I was told that option no longer exists.
Can some one post the FAX #s to expedite EAD requests?
2011 500 dollar bill template.
Enebreus
02-09 03:31 PM
Ooooh my bad. Sorry about that. It's kind of like joking about bombs in an airport lol. Its kind of an edgy subject. Anyways, congrats!
It's all good.
That's the problem with sarcasm on the Internet. You can never be sure that it reads the way it was intended. No matter how many emoticons you throw in :)
Congrats to you too. You had a hell of a lot of good entries. I really, really liked your lava flow.
It's all good.
That's the problem with sarcasm on the Internet. You can never be sure that it reads the way it was intended. No matter how many emoticons you throw in :)
Congrats to you too. You had a hell of a lot of good entries. I really, really liked your lava flow.
more...
aat0995
08-01 04:59 PM
Hi Guys (and gals)
My application got approved today. The above posts shows what it was showing and everything. Hope you are in the same boat and your get approved as well. Good luck!
My application got approved today. The above posts shows what it was showing and everything. Hope you are in the same boat and your get approved as well. Good luck!
glus
03-19 11:55 AM
Gurus,
I am writing on behalf of a close friend who is too worried to write it for himself.
Case:
He is a July 2007 filer with PD of Nov 2003 and recently had his I485 rejected. Reason - I140 denied and no appeal. However, when he checks his I140 status, it says, its still pending. He had received an RFE on I140 in October 2007 about Employment status and he had submitted all the required evidence. He also is in the same company that filed his labor. The only change he ever made is moving to a new place in the same city. Does anyone have a similar experience? What needs to be done apart from consulting a good immigration attorney? Your advice will be much appreciated.
Well. Even if I140 was denied for no good reason, and your friend files an appeal and it eventually gets approved, his priority date must be current when he re-submits his I485. So, this way or another, he needs to get I140 approved. I140 appeals take a long time. Maybe, he can try to re-do I140? That would be much faster and probably less expensive.
I am writing on behalf of a close friend who is too worried to write it for himself.
Case:
He is a July 2007 filer with PD of Nov 2003 and recently had his I485 rejected. Reason - I140 denied and no appeal. However, when he checks his I140 status, it says, its still pending. He had received an RFE on I140 in October 2007 about Employment status and he had submitted all the required evidence. He also is in the same company that filed his labor. The only change he ever made is moving to a new place in the same city. Does anyone have a similar experience? What needs to be done apart from consulting a good immigration attorney? Your advice will be much appreciated.
Well. Even if I140 was denied for no good reason, and your friend files an appeal and it eventually gets approved, his priority date must be current when he re-submits his I485. So, this way or another, he needs to get I140 approved. I140 appeals take a long time. Maybe, he can try to re-do I140? That would be much faster and probably less expensive.
more...
freedom1
01-19 04:19 PM
Hi to all,
This morning I received the e-mail message below.
Does this means that an approval letter has been sent to me?
Has anyone received such an e-mail?
Thanks,
Freedom1.
-----------------------------------------------------------
Application Type: I485, APPLICATION FOR STATUS AS A PERMANENT RESIDENT
Current Status: Document OTHER THAN CARD manufactured and mailed.
On January 19, 2007, we mailed the document we manufactured based on our earlier approval of this case, and mailed it to the address on we have on file. You should receive the new document within 30 days. If you do not, or if you move before you get it, call customer service.
This morning I received the e-mail message below.
Does this means that an approval letter has been sent to me?
Has anyone received such an e-mail?
Thanks,
Freedom1.
-----------------------------------------------------------
Application Type: I485, APPLICATION FOR STATUS AS A PERMANENT RESIDENT
Current Status: Document OTHER THAN CARD manufactured and mailed.
On January 19, 2007, we mailed the document we manufactured based on our earlier approval of this case, and mailed it to the address on we have on file. You should receive the new document within 30 days. If you do not, or if you move before you get it, call customer service.
2010 Introducing dollarbill san
eb3_nepa
08-13 09:39 PM
Last week we all got the LUD of 08/05/2007 also a Sunday. My lawyer said maybe it was a mass update, but now I am beginning to wonder if that is the case.
Now this is a THEORY but what if every Sunday they are updating the packages being sent from NSC to TSC. The very fact that there is an LUD update means 1 important thing
You are not a concurrent filer.
Maybe it is my wishful thinking, but i feel that seeing mass LUD updates on 2 consecutive Sundays is too much to be a mere coincidence.
Now this is a THEORY but what if every Sunday they are updating the packages being sent from NSC to TSC. The very fact that there is an LUD update means 1 important thing
You are not a concurrent filer.
Maybe it is my wishful thinking, but i feel that seeing mass LUD updates on 2 consecutive Sundays is too much to be a mere coincidence.
more...
InTheMoment
04-28 01:04 PM
....and that is precisely what happened when thousands of "pending demand" GC's were issued in June 2007 and the early hours of July 2nd, just before the fiasco.
Pre-adjudication as a policy started in early 2006 especially at the NSC resulting in tons of "pending demand" cases just before the fiasco.
Coming to the present time, with several receiving RFE's when their PD's are not current, I would suspect that many would en-masse get their GC when DoS moves the dates forward substantially compared to now.
Pre-adjudication as a policy started in early 2006 especially at the NSC resulting in tons of "pending demand" cases just before the fiasco.
Coming to the present time, with several receiving RFE's when their PD's are not current, I would suspect that many would en-masse get their GC when DoS moves the dates forward substantially compared to now.
hair ill canadian 500 dollar
ComicDom1
December 21st, 2007, 01:11 AM
First I want to say hello to everyone because I have not been on this site for a while. Second, I want to wish everyone a happy holiday season.
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
more...
vin13
03-17 10:19 AM
All,
I got a couple of emails from USCIS yesterday stating that they have sent notices requesting additional evidence/information on our I-485 applications. My priority date is October 2006 (EB3) and I am not sure why I would get a RFE now. Has anybody with a similar priority date get a RFE too?
I will let you guys know what was requested in the RFE as soon as I get it.
RFE can be issued even though your priority date is not current. This is because USCIS is processing the case and keeping it ready (pre-adjudicate) to issue GC when dates get current.
I got a couple of emails from USCIS yesterday stating that they have sent notices requesting additional evidence/information on our I-485 applications. My priority date is October 2006 (EB3) and I am not sure why I would get a RFE now. Has anybody with a similar priority date get a RFE too?
I will let you guys know what was requested in the RFE as soon as I get it.
RFE can be issued even though your priority date is not current. This is because USCIS is processing the case and keeping it ready (pre-adjudicate) to issue GC when dates get current.
hot Dollarbill out of and more Bug
brij523
11-10 12:31 PM
I guess poll closes after 15 days (?)
Thanks to all those who are helping out in different ways.
I would like to know what is the booth number?
Thanks to all those who are helping out in different ways.
I would like to know what is the booth number?
more...
house hundred dollar bill clip art.
greencardvow
07-17 05:36 PM
I filed 485 on July 2 2007 through Company 1. I left the Company 1 on July 7 2007. Company 2 had filed for PERM in June that had an approval on July 16 2007. I wana apply for 140/485 through Company 2 (concurrent filing) by this July 2007. Can I have 2 pending 485 application? I dont have the receipt for 1st 485 as it was just filed on July 2.
tattoo 500 dollar bill.
kshitijnt
05-28 03:05 PM
Despite increase in visa fees the service is getting poorer and poorer. The US consulate in India has from long time set a arbitrary exchange rate of 54 USD. Despite this and even after having approved petitions, etc, people are getting PIMS verifications, 221(g) etc for no reason. Not to mention the consulate appearance is mandatory and many travel to the location of the consulate.
Despite charging boat loads of money, service is being denied or unreasonably delayed to most genuine cases as well. No body is questioning them on customer satisfaction etc.
I filed my 485 under new fees filing structure. Although it looked like expensive upfront cost, I don't pay a dime for my EAD/AP renewals and I am thinking of giving up my H1 when it expires later this year. Why pay them more when you dont have to? and put ourselves through, travel to consulates, additional questions, & 221(g) & PIMS crap?
This year Mumbai consulate took 3 months to process my wife's case , putting it under 221(g) and by the time they had finished processing , we were back in US on AP. Good riddance to the consulate.
Despite charging boat loads of money, service is being denied or unreasonably delayed to most genuine cases as well. No body is questioning them on customer satisfaction etc.
I filed my 485 under new fees filing structure. Although it looked like expensive upfront cost, I don't pay a dime for my EAD/AP renewals and I am thinking of giving up my H1 when it expires later this year. Why pay them more when you dont have to? and put ourselves through, travel to consulates, additional questions, & 221(g) & PIMS crap?
This year Mumbai consulate took 3 months to process my wife's case , putting it under 221(g) and by the time they had finished processing , we were back in US on AP. Good riddance to the consulate.
more...
pictures 500 dollar bill template.
anilsal
11-15 11:23 PM
Since you are filing your GC through a lawyer, it is their job to advice you when the time comes. Keep them informed about your case and they should research and guide.
dresses 500+dollar+ill+canada
yabadaba
07-09 01:15 PM
http://www.freerepublic.com/focus/f-news/1861255/posts
look at this for more comments against us
look at this for more comments against us
more...
makeup 500+dollar+ill+canadian
bfadlia
03-15 01:31 PM
^^^^
girlfriend Million Dollar Bills, million
RandyK
11-28 11:47 AM
I guess we have to keep all this in mind when we ask for a bill that would solve the retrogression problem. Solving one problem and getting into others and ending up in the same place does not make sense.
Maybe we can suggest some relief measures to be added on to SKIL or CIR bill itself anticipating what USCIS, FBI and whatever other relavent organization is going to face, specially if something like the CIR passes, there is no way the current setup will be able to absorbe 12 to 20 million more cases even if they are added to the back of the list, giving priority to who is already in the pipeline.
Maybe we can suggest some relief measures to be added on to SKIL or CIR bill itself anticipating what USCIS, FBI and whatever other relavent organization is going to face, specially if something like the CIR passes, there is no way the current setup will be able to absorbe 12 to 20 million more cases even if they are added to the back of the list, giving priority to who is already in the pipeline.
hairstyles and gave her a dollar bill
.jpg "500+dollar+ill+us")
chanduv23
01-09 07:31 AM
^^^^^^^^^^^^^
desijackass
11-12 04:38 PM
Also says no change expected in the coming months.
See bottom of the bulletin.
:(
:mad:
F. VISA AVAILABILITY IN THE COMING MONTHS
Employment-based: At this time it is unlikely that there will be any cut-off dates in the Employment First preference during the coming months. It also appears unlikely that it will be necessary to establish a cut-off date other than those already in effect for the Second preference category. Cut-off dates continue to apply to the China and India Second preference categories due to heavy demand.
Based on current indications of demand, the best case scenarios for cut-off date movement each month during the coming months are as follows:
Employment Second:
China: none to two weeks
India: no movement
Employment Third:
Worldwide: three to six weeks
China: one to three weeks
India: none to two week
See bottom of the bulletin.
:(
:mad:
F. VISA AVAILABILITY IN THE COMING MONTHS
Employment-based: At this time it is unlikely that there will be any cut-off dates in the Employment First preference during the coming months. It also appears unlikely that it will be necessary to establish a cut-off date other than those already in effect for the Second preference category. Cut-off dates continue to apply to the China and India Second preference categories due to heavy demand.
Based on current indications of demand, the best case scenarios for cut-off date movement each month during the coming months are as follows:
Employment Second:
China: none to two weeks
India: no movement
Employment Third:
Worldwide: three to six weeks
China: one to three weeks
India: none to two week
rahul2699
05-19 11:13 AM
My H1B expired, and they are now just working on the labor certification process, so I have left the country and working outside the US. Someone did tell me that after I have been out for a 12 month period they may get me back under a new H1B. Is this correct? Reason I ask is that I have been out of the US for 4 months, and they seem to be working very slow on my Labor Cert, and I know once the this is submitted I have to wait a further 12 months, so wanted to see if it is viable to get a new H1B. Any thoughts would be appreciated.
Yes if you live out of US for at least a year after the full H-1B term, you can apply for a new H-1B. If i were you, i'll keep the labor process going while applying for a new H-1 because GC is for future employment and if anything you can retain the priority date...
Yes if you live out of US for at least a year after the full H-1B term, you can apply for a new H-1B. If i were you, i'll keep the labor process going while applying for a new H-1 because GC is for future employment and if anything you can retain the priority date...
0 comments:
Post a Comment